Inside the box you'll find a round template to use as a screw guide. Place this on the surface you want to mount your Swann Smart Security camera to.
On timber surfaces, put your screws in with a quarter of the screw exposed. For brick or masonry, drill two 6mm holes in the template, tap in the wall anchors, included in your pack, into place then leave a quarter of each screw exposed.
If you prefer to mount the camera without drilling holes in the wall, use the adhesive strips included. Place on the back of the camera, apply pressure for 30 seconds, then remove the strip and place on your reserved surface.
Now align the base with the mounting screws and slide it down to secure it in place.
Once the camera is attached, you can view it through the app and adjust it to your preferred position.