It's time to replace those tired, old cabinet door handles with something new and fresh – so head to Bunnings to check out their extensive range. To make things easy on ourselves, we opted for a black handle that matched the size of what was already there – in this case, 96mm – to avoid having to drill new holes. Choosing the same size handles is especially good if you're renting and you don't want to get in trouble with your landlord – just keep the old handles and swap them back when you move.
You may find the handles you want to replace are a different size to what was already there. This is where a template comes in handy – you can pick these up in store. Simply place it on the bottom corner of the door, opposite the hinges – the template has holes for each different cupboard and handle type, so pick the combination you want and use a pencil to mark up your drilling points.
You can do this with a drill or screwdriver. Once these are off, you're ready to put the new handles on. Ours came with snap screws, which we snapped off to the correct size – you'll need some pliers to do this. Then it's as simple as screwing them in.
If you're not doing a simple swap, check you've marked the drill points correctly by taking your handle and placing it next to your pencil marks – once everything is lined up, drill a hole all the way through the door. Use a slightly wider drill bit than the screws. A good tip when putting your handles on is to lightly screw in the top part so it's finger-tight before affixing the bottom one – this way you've got some wriggle room. Once they're both in, tighten away!
It really was THAT simple!