Skip to main content
Bunnings

Sign in or sign up

No Bunnings account? Sign up
PowerPass customer?
Visit the dedicated trade website

Project list

Sign in to your account

Ready to Collect in 2 hours

How to install drawer runners

Drawer runners being secured to the inside of a kitchen cabinet using a power drill

Overview

Runners make your drawers easier to open and close, and give them the strength to be completely open, even when they are full. We show you how to screw runners on to drawers and install them in the cabinet. You will also see how runners fit together and how to take them apart. 

Tools and materials

Tools

    Steps

    1Install the runners on the cabinet

    Fully extend the drawer runner, release the plastic catch and remove the draw guide. Now close the runner and hold it over the pre-drilled holes inside the cabinet. The front edge of the runner should sit slightly back from the front of the cabinet. Screw the runner into place. Now repeat the process with a second runner on the other side of the cabinet. Then slide both runners in and out to make sure they run freely. 
    Drawer runners being secured to the inside of a kitchen cabinet using a power drill

    2Install the drawer guides

    Line up the drawer guide with the bottom and front edges of the drawer. Screw the drawer guide into place. Then do the same on the opposite side of the drawer. To finish, slide the drawer guides into the drawer runners. Gently push the drawer past the plastic catch in the runners. To finish, slide the drawer in and out to test that it works properly.
    Drawer runners being drilled into the bottom of a cabinet drawer
    Health & Safety

    Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.

    Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer. You can also use a simple test kit from Bunnings to indicate the presence of lead-based paint.