SwiftDry 1.4 x 1m SkyLine Folding Frame Washing Line

The SwiftDry SkyLine is the epitome of Style and Strength for a non-conspicuous fold-down outdoor clothesline. Built tougher than any other clothesline out there (at least we think so!) You can buy with peace of mind, knowing you are getting a top of the line product. Designed to be part of the landscape of your home for years of hassle-free use, with its robust, clean and sharp looking design. Fold against your wall or fence while not in use with a smooth lift, pull, and lower motion. This is the future of natural outdoor drying with the breeze.  Surface Mount and In-concrete Mount post kits available separately under the fold down product category Specifications and Features:  Rated to 40kg recommended max load weight Dulux Textura Black Powdercoat finish on top of the pre-galvanised steel frame - for Longevity and Style Formed corners - for rigidity and safety. Frame made from 1.6mm thick wall square box steel (thickest available in comparable products) so the SkyLine is strong enough to hold a full load of heavy wet wetsuits if needed Nylon Bushes - for smooth operation PVC cord - for no rust and durability All fixings are made from 316 Stainless Steel SwiftDry Easy tension locking system Designed with the front of clothesline frame and lines slightly higher than the rear lines for ease of accessing the rear lines and to give more clearance from the ground for longer items such as sheets Smooth and lightweight folding up and down operation from the front bar. Pins included to firmly lock in upright position for windy conditions - the only clothesline available that will not unhitch with wind and allow the frame to bend and washing to end up on the ground.  Mounting bracket dimensions: 22.5cm long x 4cm wide. Mounting bracket holes: 8.5 mm - with 20cm between the hole centres - vertically on each bracket. Bottom hole is a 75mm long slot. Mounting Screws included for timber and masonry wall plugs included if fixing to brick or concrete. Listed width (eg 2.4m) is fixing hole centre to centre, however there is up to 20mm adjustment each side when installing to allow for variances in your existing posts/setup.