Skip to main content
Bunnings

Sign in or sign up

No Bunnings account? Sign up
PowerPass customer?
Visit the dedicated trade website

Project list

Sign in to your account

Ready to Collect in 2 hours
Special Order
NZ Nails

NZ Nails Twisted Flat Head 75x3.15mm 5kg Galv Nail

I/N: 0754523

$474

How to purchase

Special Order

This item can only be purchased online or in-store from the Special Orders desk. Learn more(opens in a new tab)

Click & Collect

Select a store for availability

In-store

Select a store for availability

Delivery

Enter postcode or suburb for estimate

  • Galvanised Nails Have been coated after manufacture with zinc for corrosion protection.
  • Flat Head - A large diameter head (normally up to 2.5 times the thickness of the nail shank).
  • Made from square twisted wire, this nail shank is used where increased holding is required.
  • Suitable for exterior use.

Galvanised Nails
Have been coated after manufacture with zinc for corrosion protection. For exterior use or where moisture may occur.

Handy Tips – Smooth Shank Nails / For Common Fixing
A rule of thumb that can be used for determining the length of nail required is three times the thickness of the timber being fixed. e.g. 25mm Timber = 75mm Nail.
Stagger nails where close nailing is necessary to prevent timber splitting.
When nailing near the edge of the work surface it may be necessary to drill pilot holes using a slightly smaller diameter drill than the nail shank to stop the timber splitting.
Wherever possible, skew nail to maximise joint strength.

Flat Head
A large diameter head (normally up to 2.5 times the thickness of the nail shank). This head will sit slightly proud of the work surface. Flat head nails are designed to resist pull through on soft or thin timbers. This nail is used where the concealment of the head is not critical. Particularly suitable for strong construction. e.g. Framing.

Square Twisted Shank
Made from square twisted wire, this nail shank is used where increased holding is required.