Motomuck 5L Wheelmuck+ Brake Dust Wheel Cleaner

Wheels can get dirty relatively fast with a build up of brake dust. We have specifically created a NO EFFORT product that removes brake dust effortlessly called Wheelmuck+. The formula is fast acting and has been specially formulated at a viscosity to allow easy application and to enable it to be very cost effective. Wheelmuck+ is also PH neutral which makes it safe to use on all wheels and painted surfaces. When using Wheelmuck+, you’ll see it undergoes a colour change from yellow to red as a reaction occurs to dislodge the brake dust iron contaminants, enabling it to be washed away with water. Note before: It is recommended to only do one or two wheels at a time. For ceramic pad dust, dirt, grease or tyre silicone overspray a slight agitation with a soft brush is necessary. Step one Adjust nozzle on applicator to a fine spray position. Spray evenly on cool, dry wheels. Step two Leave on for 2-3 minutes. Wheelmuck+ changes from yellow to red to purple as reaction occurs. If any areas have dried and turned brown, do a quick recoat to those areas just prior to rinsing off. Step three Rinse off while deep purple, with a jet of water from hose or pressure washer. Reapply and agitate with soft brush if necessary. Sprays on YELLOW, if no change then no brake dust contaminants, or possibly ceramic pad dust. Turns RED as reaction starts. Turns PURPLE when reaction well underway. Turns DARK PURPLE when reaction is almost complete. Rinse off just before next step. If it turns BROWN, reaction has started reversing. A quick spray on BROWN spots with WHEELMUCK+ before rinsing off will sort this.