Kutzall Medium Extreme Sanding Disc

The must-have, most versatile angle grinder accessory, Kutzall Sanding Discs will easily optimize your creative control. Proudly crafted in the USA, they perform with remarkable wear-life and provide a truly unique combination of superior material removal and surface quality. With effortless operation (with or against the grain) and resistance to loading, you'll use them project after project. Their outstanding performance on a wide variety of materials will keep them locked in your favorite grinder. Wood, plastic, drywall, rubber, fiberglass, and soft stone, they will be your go-to workhorse for any task. NOTE: Should only be used on non-metallic materials. Extreme Coating – When heavy material removal is desired. Exceptionally resistant to loading; great for working with wet or gummy woods. Sanding Disc– The sanding discs have a nearly flat shape, with just a slight curvature for most effective use of the coated area. They are used for major material removal on carvings, logs, remodeling, and various do-it-yourself projects Mounting Instructions: The Sanding Discs feature a 7/8" I.D. and are intended to mount on a standard electric angle grinder with a 5/8" shaft. They mount on the 7/8" shoulder found on the flange or adapter included with most angle grinders. The flange is put on the grinder first, followed by the wheel and then the nut. *Metric Mounting: Use M14 Nut + 14mm I.D. flange with 22mm shoulder. Compatible with most 4-1/2 inch (115mm) angle grinders including: Bosch, Dewalt, Milwaukee Makita, Black & Decker, Ryobi, Hitachi & more. Recommended operating speed range: 5,000 - 15,000 RPM. Cleaning: They can be easily cleaned using a torch and/or a quick few passes with a soft wire brush, the heat will not harm the teeth!