Kutzall 6.3mm Taper 1/8" 3.2mm Diameter Coarse Shaft

Kutzall burrs are the perfect companions for your rotary carving tools, designed to work easily and efficiently where other conventional tools fail. Proudly crafted in the USA, they perform with remarkable wear-life and provide a truly unique combination of superior material removal and surface quality. With effortless operation (with or against the grain) and resistance to loading, you'll use them project after project. Their outstanding performance on a wide variety of materials will keep them locked in your favourite grinder. Wood, plastic, drywall, rubber, fiberglass, and soft stone, they will be your go-to workhorse for any task. NOTE: Not for use on metals, ceramics or hard stones. Kutzall Original tools are the most popular and versatile tools in the Kutzall line. They feature sharp, uniform pointed teeth of exceptionally hard metals, brazed onto the steel tool form. These tools remove material very rapidly, yet leave a relatively fine surface on the work. Kutzall Original tools also provide a very smooth cutting action for ease of control Features: 1/8" Shank (3.2mm) 1/4" Cutting Diameter (6.3mm) 1/2" Cutting Length (12.7mm) Original Coarse Diameter and head length dimensions on Kutzall burrs are base dimensions. The coatings add approximately .060" - .102" (1.5-2.6 mm) Compatible with popular grinders with 1/8” collets or adjustable chucks including: Dremel, Foredom, DeWALT, Milwaukee and more. Recommended operating speed range is 10,000 - 25,000 RPM. They will remove material at lower speeds (hand drills, drill presses) but both material-removal rate and control improve as speed increases. Cleaning: They can be easily cleaned using a torch and/or a quick few passes with a soft wire brush, the heat will not harm the teeth! Recommended Max RPM is 25,000.