Lowest Price Policy^
+40,000 Products
2 hour Click & Collect
Easy in-store Returns
Lighting & Electrical
How to hide TV cables
How to install a solar sensor light
How to install a solar sensor light
Overview
Solar sensor lights are a great idea for deterring intruders and lighting up your entertaining area. We'll show you how to install the light and the solar panel in just a few steps.
Steps
Position the light
First, figure out the best position for your light and solar panel.
Remove the mounting bracket
Take the mounting bracket off the light before you put it up.
Mark and pre-drill the holes
Position the bracket where you want your light to go and mark your holes. Then predrill them.
Screw on the bracket
Reposition the bracket and screw it in place.
Attach the sensor light
Attach the sensor light to the bracket and angle it in the right position.
Mark and pre-drill holes
Find a sunny spot for the panel. Mark the position of the holes and then pre-drill them.
Screw on the panel
Now screw the panel into place by hand. Then angle it up towards the sun.
Plug in the power cable
Run the power cable over to the sensor light and plug it in. Then wait for the sun to charge the batteries.
More D.I.Y. Advice
Health & Safety
Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.
Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer.
Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.
Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer.