Skip to main content
Bunnings

Sign in or sign up

No Bunnings account? Sign up
PowerPass customer?
Visit the dedicated trade website
Lowest Price Policy^
+40,000 Products

How to make the Bluey bedroom window

A round stained glass-look window made from black flute board with coloured cellophane as the panes, attached to a wall with paper lanterns and glow in the dark stickers

Overview

Here’s a fun project for Bluey lovers to bring a piece of the Heelers' home into your place. Follow these easy steps to replicate the stained glass window from Bluey and Bingo’s bedroom using lightweight flute board and coloured cellophane. And to really get the look, check out our Bluey bedroom makeover and more Bluey craft.  

Safety tip: Always wear the appropriate safety equipment (safety glasses, gloves, and a mask, for example) and always follow the instructions for the product or equipment.

Steps

1

Before you start your Bluey bedroom window

  • Cut the coloured cellophane into small squares about 10-20mm.
  • Set aside cellophane squares in four piles, sorted by colour.
  • Follow the instructions to download, print and cut out the Bluey window template.
  • Tape the printed pieces together to make the window template.

2

Cut out the paper Bluey window template

Cut out the window template circle using scissors. Lay the window template on a cutting mat, then use a utility knife and ruler to cut out the window ‘glass’ sections. 
A pair of hands use a ruler and utility knife to cut out a paper window template on a green cutting mat]

3

Trace the Bluey window template onto flute board

Lay the black flute board on the cutting mat and place the cut-out paper template on top. Trace around the outer circle and the internal window sections using a pencil. 
Right hand uses a pencil to trace the cutout window template on a piece of black flute board

4

Cut out Bluey window from the flute board

Cut out the traced shape and inner sections from the flute board in the same way as before. This will be the final frame for your stained glass window.
A pair of hands use a ruler and utility knife to cut out the marked window on black flute board on a green cutting mat

5

Position the self-adhesive film

Cut a piece of clear self-adhesive film slightly larger than your template (stick two pieces side by side to make a bigger sheet if needed). Place the self-adhesive film – sticky side up – over the paper window template.
Green Bunnings hammer
Tip: You can tape down the corners of the self-adhesive film to keep it in place.
A left hand holds clear self-adhesive film which is being cut by scissors with a paper window template and green cutting mat underneath

6

Stick the cellophane onto the Bluey window

Attach the cellophane squares to the self-adhesive film, using the paper template as a guide and working in sections with one colour at a time. Press down firmly with your finger to secure.
A right hand using the index finger to stick green cellophane squares onto self-adhesive film covering the paper window template

7

Finish the Bluey stained ‘glass’ window

Carefully position the black flute board window cutout onto the self-adhesive film to align with the template underneath. Press down firmly so it sticks securely to the film. Use scissors to trim the self-adhesive film around the window. Attach to the wall with removable picture hanging strips. 
A pair of hands presses the black flute board window cutout onto the self-adhesive film

8

Keep in mind...

  • Keep scissors and utility knives out of reach of children.  

Looking for more Bluey craft?

Here’s how to weave your own Bluey Flappy.

 

Photo credits: Jonny Valiant, Sophie Mullane. 

Health & Safety

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.

Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer.