Use a railing off-cut as a spacer to help you to get an even spacing between your palings. Starting with the wider palings, put the spacer in, but the paling up against the spacer and use a couple of nails at the top, the bottom and then the middle of the paling. If you are starting your fence from scratch, you would line up the paling with the edge of the post. Continue nailing the palings along the fence with the spacer for an even fence.
2Overlay the boards with narrower boards
Place the narrower board on the plinth at the bottom, centre the board between the two wider boards at the back and nail in. Remember to check every few palings with a spirit level to make sure that they are still straight.
Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.
Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer. You can also use a simple test kit from Bunnings to indicate the presence of lead-based paint.