Bunnings
Icon - Website - Mobile - Add to project list.svgIcon - Website - Mobile - Cart.svg

Sign in or sign up

No Bunnings account? Sign up
Go to Trade

Project list

Sign in to your account

Products
DIY Advice
Services
Stores
Sign up
Our Price Guarantee
Go To Trade
Our Price Guarantee

How to install a lattice fence

Person putting lattice fence together.

Overview

Lattice is great for growing creeping plants or to use for blocking off an area of your garden. We show you how to measure and install lattice for a fence.

Tools and materials

Tools

Materials

Steps

1Measure between your posts

In this example, we already have posts in place. You need to measure between the posts to make sure the lattice will fit in between. Measure the lattice and then cut the lattice surround to fit. Transfer measuring marks onto the surround timber. You need to cut 2 widths and 2 lengths.
Person using measuring tape around a piece of timber that's stuck into the ground.

2Cut pieces for your lattice frame

When we cut, we'll cut a 45-degree mitre so it gives a nice join and you don't see any end ground. Square one end and cut a mitre on it. Measure from there along the short edge and cut your next mitre. Do this for the tops and bottoms and this gives you the pieces you need for your frame.

Person sawing bit of timber.

3Attach the surround to the lattice and screw it together

Put the surround onto the lattice by placing lattice into the groove on the surround. Pre-drill the corners and screw them together. Repeat this all the way around.
Person putting lattice fence together.

4Attach lattice frame to the posts

Place the lattice frame in between the posts. Pre-drill some holes in the surround and the posts and screw it in place.
Perso drilling lattice fence to timber post.

More D.I.Y. Advice

View all
View all
Health & Safety

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.

Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer. You can also use a simple test kit from Bunnings to indicate the presence of lead-based paint.