Skip to main content
Bunnings

How to fix a picket fence

Person drilling pickets in picket fence.

Overview

Repairing a picket fence is usually just as simple as replacing some broken pickets. We'll teach you how to remove the old pickets and trim your new pickets to size. You'll also learn how to screw the pickets into place and keep the screw lines level across the fence.

Steps

  1. 1

    Remove the broken pickets from the picket fence

    Fence pickets can be held in place on a fence rail with screws or nails. Use your impact driver to remove any screws and a claw hammer to remove nails or hammer them down. Sometimes a picket is stuck in place and calls for a wrecking bar to pry it off.
    Person using impact driver to remove nails from picket fence.
  2. 2

    Trim the replacement pickets for the picket fence

    Measure the height of your fence to see how long each of your pickets needs to be. Then mark that measurement onto the bottom of your replacement pickets with a pencil and combination square. Now use your circular saw to trim the pickets to size.
    Person measuring bit of timber with steel ruler.
  3. 3

    Drill pilot holes for the screws into the pickets

    Hold the picket in position on the fence. Then use a pencil and combination square to mark the picket level with the top and bottom screw lines on your fence. Now remove the picket from the fence and drill pilot holes for the screws on the centre of each of these lines. 
    Person drilling into bit of timber.
  4. 4

    Install the replacement picket on the picket fence

    Hold the picket in place on the fence and use your impact driver to screw it in. If you are replacing a few pickets in a row, consider using a spirit level and timber clamps to keep them straight and evenly spaced. If you want your replacement picket to sit slightly off the base of the fence, keep it steady by chocking it up before you screw it in.
    Person drilling pickets in picket fence.

Get inspired by projects from the Bunnings Workshop community

Health & Safety

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.

Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer.