- Kit contains: 1 x dent puller
- 1 x plastic scraper
- 28 x plastic dent puller pads
The Trojan Dent Repair Kit is ideal for repairing hail damage and small dents on your car where the paint has not been cracked or damaged. All you need to undertake small dent repairs is this kit, a hot glue gun with glue and some isopropyl alcohol spray.
Directions for use:
1. Clean and dry the dent and the immediate surrounding area of the vehicle with isopropyl alcohol spray (not included)
2. Select a puller pad in similar size and shape to the dent.
3. Apply enough hot glue to cover the surface of the puller pad then quickly apply to the dent on the vehicle
4. Apply firm pressure to the puller pad and allow the glue to set for at least 30 seconds
5. Position the dent puller hook over the end of the puller pad and then lightly tighten with the top adjustment knob
6. Gently Squeeze the handle of the dent puller to pull the dent out until the glue releases
7. Spray the residual glue with the isopropyl alcohol spray and then gently remove with the included plastic scraper
8. If your original dent was large, repeat the process with progressively smaller puller pads until your dent has been repaired.
