Sunlite Screw Fixings Galvanised 25pk

Sunlite is easy to fix with Sunlite fixing screws.
8mm screw holes should be drilled prior to fixing, using a slow speed drill. Be careful of putting too much pressure on the sheet (ie walking
on it or using it as a support).
Sunlite should be fixed at every fourth corrugation (third
corrugation in high wind areas) and every second corrugation
at gutters, ridging and overlaps.
When using Sunlite for roofing, screws should be fixed through
the crest of the wave. For walls, fasten through the valley. Fixings
should be firm but not over tight.