Bunnings

Sign in or sign up

No Bunnings account? Sign up

Project list

Sign in to your account

Our Price Guarantee

Motomuck 750ml Brake Dust Wheel Cleaner

No reviews yet

I/N: 0328786

Motomuck 750ml Brake Dust Wheel Cleaner
1/6
No reviews yet

I/N: 0328786

$29

Select your preferred purchase method

StoreFind your item in store

We are unable to determine your nearest store

Features

  • Low foaming
  • 100% biodegradable
  • New Zealand made
  • PH neutral - Safe on wheels and painted surfaces
  • Changes colour as it works
Wheels can get dirty relatively fast with a build up of brake dust. We have specifically created a NO EFFORT product that removes brake dust effortlessly called Wheelmuck+. The formula is fast acting and has been specially formulated at a viscosity to allow easy application and to enable it to be very cost effective.

Wheelmuck+ is also PH neutral which makes it safe to use on all wheels and painted surfaces. Wheelmuck+ is a little smelly, but rest assured that component is 100% biodegradable.

When using Wheelmuck+, you’ll see it undergoes a colour change from yellow to red as a reaction occurs to dislodge the brake dust iron contaminants, enabling it to be washed away with water.

Details

Dimensions

 

Width

Height

Length

WHEEL CLEANER 750ML DIMENSIONS

11.5mm26.5mm6mm

Package

115mm265mm60mm

Weight

Easy To Carry

Total Weight 0.898kg

Specifications

Model Name
BRAKE DUST WHEEL CLEANER 750ML
Model Number
MM-WM+O.75L
Safety Instructions
Tarnishing will occur on older corroded clips and older style wheel balancing weights. Oxidation can occur on Zinc, Cadmium plated or other specific raw surfaces. Don’t use on rims that are old, bad condition or damaged. Oxidation stains can occur on driveways. To clean, simply hose off after application. However stain will disappear in a couple weeks regardless.

Returns

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.

Installation

Note before: It is recommended to only do one or two wheels at a time. For ceramic pad dust, dirt, grease or tyre silicone overspray a slight agitation with a soft brush is necessary. Step one Adjust nozzle on applicator to a fine spray position. Do this by opening the nozzle a couple turns. Pump the trigger until product comes out in a stream. Close the nozzle all the way. Open it a tiny amount, until product just starts coming out when you operate the trigger. Fine adjust nozzle to get good mist when operating trigger hard. See video below. Spray evenly on cool, dry wheels. Step two Leave on for 2-3 minutes. Wheelmuck+ changes from yellow to red to purple as reaction occurs. If any areas have dried and turned brown, do a quick recoat to those areas just prior to rinsing off. Step three Rinse off with a jet of water from hose or pressure washer. Reapply and agitate with soft brush if necessary.

Ratings & Reviews