Select the location you plan to lay the Fast Floor panels. If this area is grassed, mow the grass as short as possible before you start. Make sure that the site is flat. If not, spread sand to fill any low spots and level with a straight edge. Optionally, dig out 40mm of soil to install the Fast Floor panels level with the ground.
Lay out weed mat over the area where you wish to install the Fast Floor panels.
Insert the four Joiner Clips on the long side with tabs.
Place the first Fast Floor panel in the corner with the tabs on both sides facing the direction they are being laid.
Lay all panels in one direction first, then start another row.