Bunnings

Sign in or sign up

No Bunnings account? Sign up
PowerPass customer?
Visit the dedicated trade website

Project list

Sign in to your account

Feast Watson

Feast Watson 1L Satin Wipe On Poly

4.4 (9)

I/N: 1540455

Feast Watson 1L Satin Wipe On Poly

$50


How to purchase

Click & Collect

Select a store for availability

In-store

Select a store for availability

Delivery

Enter postcode or suburb for estimate

Features

  • No drip marks
  • No brush marks
  • Easily applied with cloth
A clear, silky smooth, oil based polyurethane finish that provides durable protection with classic hand-rubbed beauty.

PREPARATION

Before getting started, ensure the following:

Fill nail holes, cracks and other defects with a Water Based Putty after applying the first coat of this product for accurate colour matching.
With mineral turpentine, remove stains, dirt, wax, grease and oil.
Using a suitable polish remover, remove any polish.

Bare Timber
If you are applying Wipe-on Poly to Bare Timber:
Sand to a smooth surface.
Remember to remove all sanding dust before coating.
- For naturally oily timbers, seal the timber with Feast Watson Proofseal as per the directions prior to application.

Previously Coated Timber
If you are applying Wipe-on Poly to Previously Coated Timber:
Sand back previously varnished surfaces to a dull finish.
Remove all sanding dust before coating.
Thoroughly clean the surface with Floorclean and allow to dry.
Apply one coat to a small test area. Allow to dry for 6 hours.
Press sticky tape firmly to the surface and pull off quickly.
- If the coating comes off, sand back to bare timber.
- If coating adheres well, sand the entire area with 180 - 240 grit paper for good adhesion, remove dust, then follow application instructions.

APPLICATION

Make sure to shake Mastertouch Wipe-on Poly container for one minute prior to use.

How to apply Wipe-on Poly to Interior Timber:
Apply a generous amount with a clean lint free cloth in the direction of the grain.
Allow to dry for a minimum of 6 hours.
- If you require additional coats, follow the above instructions.

Remember that a light sand with 240 grit sand paper is recommended between coats.

Looking to Stain?
Apply Feast Watson Prooftint following label directions prior to the application of Wipe-on Poly.
Allow Prooftint to dry the recommended period before applying Wipe-on Poly.

Details

Dimensions

 

Width

Height

Length

Product

70mm160mm130mm

Package

130mm160mm70mm

Specifications

Colour
Clear
Model Name
Feast Watson Satin Wipe on Poly 1L
Model Number
917W0095-1L
Material
Oil Based
Indoor (Yes/No)
Yes

Returns

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.

Return Policy

Shop Online

Shop wherever you are, whenever you want.

  • Buy products online from our wide range
  • Click & Collect your purchase in-store or we'll deliver it to you
  • Visit our Shop Online page to learn more

Ratings & Reviews