Skip to main content
Bunnings Warehouse
Lowest Price Policy^
Free delivery* withOnePass_Icon.svg

How to stencil paint outdoor tiles

Blue tiles Stencilled pathway leading up to the front door, with white timber railing

Overview

Transform tired outdoor tiles

Give the outdoor tiles on your verandah or patio a stunning makeover using a specialised paint system and a stencil design. First, patch cracked tiles and rejuvenate the grout, then apply a base colour using concrete paint and finish with a stencil and sealer. 

Steps

  1. 1

    Clean the patio tiles

    Wearing protective gear, sweep and pressure-clean the tiles. In a bucket, mix one part sealed surface cleaner into five parts water and scrub the porch with a deck brush. Rinse off with the pressure washer and leave to dry.
    Green Bunnings hammer
    Tip: Before cleaning, wet surrounding foliage to dilute any solution that spills over.
    A broom is used to scrub tiles clean to prepare for painting
  2. 2

    Repair chipped tiles

    To repair chipped tiles, wear disposable gloves to knead a multipurpose epoxy into a uniform colour. While it’s still warm, work quickly to push it into the chipped section of tile, shaping to fit and squaring the edges with a scraper. Leave to cure for an hour, then sand smooth with 120-grit abrasive paper. 

    Hands wearing gloves are pushing epoxy into chipped tiles to repair them
  3. 3

    Revive grout and fill cracks

    Use a ready-mix exterior grout to fill damaged grout and cracks, working in one direction to smooth into the gaps with a small rubber squeegee. Wipe away excess with a clean, damp sponge. Wash out the sponge, wring to remove water, then wipe away the grout haze and leave to dry.
    A hand wearing a glove is using squeegee to fill a crack in a tile with exterior grout
  4. 4

    Apply the primer

    Mask around house walls and posts with painter’s tape. Mix up sealed surface primer with the supplied additive and pour into a tray. To apply, cut in around the edges with a brush, then complete with a roller and leave to dry.
    Green Bunnings hammer
    Tip: The primer is a membrane that goes on pale blue but dries clear.
    A hand wearing a glove is using a paintbrush to cut in around the edges of the tiles with primer
  5. 5

    Paint the tiles

    To apply the base colour, cut in with a brush, then complete with a roller and leave to dry. Apply a second coat and leave to dry overnight. 

    Green Bunnings hammer
    Tip: We used the Dulux ‘Concrete & Paving’ system including self-sealing finish with anti-slip additive.
    A hand wearing a glove is using a roller to apply paint to the patio tiles
  6. 6

    Paint the stencils

    Use a utility knife to cut cardboard the same size as the tiles with a cutout in the middle for the stencil pattern. Centre the stencil on the cardboard and secure with painter’s tape, reinforcing around the edges. To transfer, hold the template on each tile, stencil face down, and dab on the stencil colour with a round chalk-paint brush. Leave to dry overnight.

    A stencil taped to a tile is being painted by gloved hands using a round brush
  7. 7

    Keep in mind…

    • Wear a mask, protective eyewear, gloves and waterproof footwear, and cover skin when working with cleaning solutions and a pressure washer.

    • Keep all paint and chemicals out of reach of children and pets, and wear safety gear while painting.

    • Paint colours may vary on application.

  8. 8

    Looking for more ground-level projects?

    Check out our flooring ideas and advice for inspiration.

     

    Photo Credit: Jonny Valiant, Natasha Dickins

Logo - Workshop - Bunnings Branded - Transparent
Icon - Website - Workshop lightbulbGet InspiredQuestionsAsk QuestionsSpeech bubblesShare Projects
Bunnings Workshop is an online community for D.I.Y. and gardening discussion. Get your questions answered at workshop.bunnings.com.au
link-outJoin the discussion

Get inspired by projects from the Bunnings Workshop community

Health & Safety

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.

Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer.