Skip to main content
Bunnings

Sign in or sign up

No Bunnings account? Sign up
PowerPass customer?
Visit the dedicated trade website
Lowest Price Policy^
+40,000 Products

How to install a laminate benchtop

The image shows a kitchen timber island benchtop neatly installed on a tiled floor.

Overview

A new laminate benchtop can completely transform your kitchen, laundry or workspace. It’s a practical surface that’s easy to maintain and, with a bit of D.I.Y. know-how, straightforward to install. Follow this step-by-step guide to get a neat, professional-looking result.

Safety tip: Always wear the appropriate safety equipment (safety glasses, gloves and a mask, for example) and always follow the instructions for the product or equipment.

Steps

1Check your cabinets are level and stable

Start by inspecting the base cabinets where your laminate benchtop will sit. It’s important that these are level, properly aligned, and securely fixed to the floor or wall. Use a spirit level across the tops to check for any variation. If needed, adjust the cabinet legs or add packers beneath the carcasses until everything is sitting flat and true. A level and stable base ensures your benchtop will install evenly and avoid warping or movement over time.
A Bunnings Team Member is using a spirit level to ensure the kitchen cabinets are levelled and stable.

2Prepare any benchtop joins

If your benchtop includes a join, it may already come pre-cut and machined by the supplier. This is ideal, as joining laminate benchtops manually can be tricky and requires precise cutting for a neat finish. A pre-cut join means you won’t need to rout your own connecting channels or holes. Instead, you can simply align the pieces and secure them using the supplied joining hardware, making the installation process much smoother.
A person is pointing to a laminate pre-cut benchtop join.

3Mark the cut-out location

Before securing your benchtop, you’ll need to mark where any appliance cut-outs will go. Apply masking tape to the laminate surface to help reduce chipping while cutting. If your appliance comes with a template, place it over the taped area and trace the outline with a pencil. Double-check all measurements to ensure accuracy before moving on.
A Bunnings Team Member is marking the cut-out location on a laminate benchtop using a pencil and masking tape.

4Drill holes at the corners

Once your cut-out is marked, remove the benchtop from the cabinets and prepare it for cutting. Drill 10mm holes at each inside corner of the traced outline. These holes act as pivot points, making it easier to guide the jigsaw cleanly around corners without overcutting.
A Bunnings Team Member is drilling holes at the corner of the traced outline.

5Cut with a circular saw

Next, use a circular saw to cut the straight edges of your marked-out section. Take your time and follow the lines carefully. Make sure the benchtop is supported on either side of the cut to avoid chipping or splintering as the saw blade exits the material.
A Bunnings Team Member is using a circular saw to cut the straight edges of marked-out section on a benchtop.

6Cut corners with a jigsaw

After completing the straight sections, switch to a jigsaw to carefully cut the corners, joining up with the pre-drilled holes. This allows for greater control and precision around tight curves. Always wear safety gear and go slowly to avoid damaging the laminate finish.
A Bunnings Team Member is using a jigsaw to carefully cut the corners along a marked line on a benchtop.

7Seal the raw edges

Once the cut-out is complete, use a moisture-resistant sealant on all exposed raw edges. This step is essential to help protect the timber core from water damage, particularly around sinks and other wet areas. Allow the sealant to fully dry before proceeding to install the benchtop.
A person is sealing the raw edges of a cut benchtop with a protective coating using a paintbrush.

8Prepare and glue the benchtop join

Start by dry fitting the benchtop sections onto the base cabinets. Carefully check that each piece lines up correctly and that the edges are flush along the top and sides. This trial fitting helps confirm that the join is snug and well-aligned before you move on to securing it. If the benchtop has been pre-cut by the supplier, you may notice biscuit slots and pre-drilled holes along the joining edges. These are intended to accommodate alignment biscuits and connector bolts, which make the joining process easier and more accurate. Confirm that all hardware is present and fits correctly.

Once you’re satisfied with the alignment, remove the benchtop pieces and apply a generous bead of PVA wood glue along the mating edges. Make sure to coat all surfaces evenly, including inside any biscuit slots. The glue will help create a strong, lasting bond between the two benchtop sections once they are connected.

A person is applying PVA wood glue to the raw edge of a benchtop join using a wooden stick.

9Connect and tighten the benchtops

With glue applied, carefully bring the benchtop sections together so the joining edges meet snugly. If your benchtop includes biscuit slots, insert the alignment biscuits as you join the pieces. These help keep the top surface flush and steady during tightening. Once aligned, locate the connector bolts on the underside of the join. Using a spanner, gradually tighten each connector. As you do, the sections will be pulled tightly together, creating a smooth and seamless finish along the top. Take your time and tighten the connectors evenly to avoid any shifting or uneven gaps in the join.
A close-up of a benchtop connector bolt joining two laminated benchtop sections securely together.

10Pre-drill through the cabinet rails

With the benchtops now joined and positioned correctly on the cabinets, begin by pre-drilling pilot holes through the cabinet rails. Drill upwards into the underside of the benchtop, being careful to space the holes evenly for secure fixing. This step is crucial to prevent the timber from splitting and helps guide the screws in straight during installation.
A person uses a drill to pre-drilling pilot holes through the cabinet rails.

11Add L brackets for extra support

To provide additional strength and help lock the benchtop in place, install L brackets at the rear of the base cabinets. Secure them into the cabinet frame and the underside of the benchtop. This reinforcement is particularly helpful around joins or areas subject to heavy use, and it can be done before or after screwing, depending on your setup.
A person is using a cordless drill to add L brackets for extra support and and help lock the benchtop in place.

12Fix the benchtop with screws

With the benchtop aligned and supported, finish securing it by driving 28mm screws through the cabinet rails into the underside of the benchtop. Use the pre-drilled pilot holes to guide the screws in cleanly. Be careful not to overtighten or drill too far, which could damage the laminate surface. Methodical screw placement along each cabinet run will ensure a solid and stable finish.
A Bunnings Team Member is is drilling upwards from inside a cabinet to fix the benchtop with screws.

13Want more D.I.Y. projects?

Health & Safety

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.

Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer.