Safety & Security
How to prepare for a flood
Measure up your plywood boards
If your windows are exposed to the elements or there's the risk of debris hitting them during a cyclone or severe storm, board them up with plywood to protect them. Hold the sheet of plywood up against the window and use a pencil to mark where you want to drill the screws into the frame.
Screw the boards to the window frame
Drill self-tapping screws into the plywood until the screw goes through to the other side of the plywood. Then hold the plywood sheet against the window frame and fasten it. Secure the plywood to all corners of the window frame.
Number the plywood sheets
Once you have attached the plywood to the windows, a good tip is to number each of the sheets. Then draw a basic plan of your house and mark where the windows are. Next to each window on the plan, write down the numbers of the plywood sheets attached. This will make it easier to re-install the plywood in case of another storm or cyclone.
Choose permanent protection
Visit your local authority website
For more information about being prepared, visit your local authority website: