Skip to main content
Bunnings

Sign in or sign up

No Bunnings account? Sign up
PowerPass customer?
Visit the dedicated trade website
Lowest Price Policy^
+40,000 Products

How to paint timber window frames

An exterior shot of the freshly painted white timber window frames shows us the end product.

Overview

Window frames may not be a dominating factor in your home’s design, but how they look can affect any space dramatically. Peeling paint on a window frame can bring the whole feel of the room down, standing out against fresh walls and exposing the timber underneath to potential damage. Luckily, there’s a super-easy fix!

This simple painting project will rejuvenate any wooden window frames, giving them a new lease on life and ensuring their longevity. The key is in the preparation and quality of materials – take the time to prepare your frames properly and use the best paint available to give your timber window frames the best chance at surviving whatever is thrown at them. Check out our guide on how to choose the right paint finish.

The other element to consider before starting this D.I.Y. project is which colour to paint your frames! If you already have a feature statement, consider a neutral or white tone, as it will brighten the space without clashing with anything else. However, if you’re looking to make a statement, or want to draw attention to your windows, opt for a shade that’s slightly lighter or darker than your walls.

Steps

1Clean the window frames

Before you make any changes to your timber windows, it’s important to prepare the surfaces. Using a brush, wipe away all dust and dirt.
A persons hand prepares the window frame by brushing away loose dust.

2Sand frames

Once they are clean, sand down your frames to remove any existing paint or varnish.
A persons hand prepares the window frame by sanding back the window frame to remove any existing paint.

3Brush off dust

Brush off dust once complete.
A persons hand brushes off the remaining dust to prepare the surface for painting.

4Mask off area

Apply masking tape to the edges to prevent the new paint from bleeding.
A man applies yellow masking tape to the window exterior to prevent paint bleeding.

5Paint your windows

Paint your first coat of paint, using a paintbrush. Leave to dry. Repeat with a second coat and leave to dry. If you have a spillage, not to worry just use your rag to clean it up.
Applying the first coat of white paint with a steady hand and paintbrush onto the window frame exterior.

6Remove masking tape

Remove the masking tape before the paint dries. Your new timber windows are now ready to be admired.
A person removes the yellow masking tape to admire the quality paint job and now look timber window frames.
Health & Safety

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.

Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer.