Lowest Price Policy^
Free delivery* with
4 hour Click & Collect
Easy in-store ReturnsHow to get a limewash effect with paint
How to get a limewash effect with paint
Overview
A limewash-style wall finish is a beautiful way to add warmth and character to any room. With its soft, cloudy look that shifts subtly with the light, it’s perfect for creating a calm, natural feel. Best of all, you don’t need specialised limewash paint, just two complementary colours and a clever painting technique. Here’s how to achieve a limewash effect with regular wall paint.
Safety tip: Always wear the appropriate safety equipment (safety glasses, gloves, ear muffs and a mask, for example) and always follow the instructions for the product or equipment.
Steps
Prepare your space
Start by clearing the room and moving furniture away from the walls so you have space to work, and protect your flooring with drop sheets. Take down any pictures, hooks, or cover plates. Next, give your walls a thorough clean using sugar soap to remove dust and grime. If you notice any cracks or holes, fill them in and sand the surface smooth.
Apply an undercoat and choose your colours
Once your surface is clean and dry, apply an undercoat or primer if the current paint isn’t in a good condition. This helps seal the surface and provides a consistent base for your limewash effect paint. Let the undercoat dry completely before moving on. Then, for the limewashing, select two tones that work well together. One will be your base (or primary) colour, and the other will provide the layered texture. Keep the contrast gentle - this effect is meant to feel natural and soft, not bold. Both paints should be matte so the finish remains velvety and subtle.
Cut in around the edges
Begin painting by cutting in with your primary colour. Use a paint brush to paint around trims, corners, and the edges of the wall. Keep your brushstrokes loose and slightly feathered. This will help the limewash layers blend seamlessly in the next stage.
Set up your paint tray
To blend colours easily as you paint, create a divider in the centre of your paint tray using waterproof tape. Pour one colour on each side of the divider, then dip just the tips of your block brush lightly across both paints. Avoid overloading the brush - wipe off any excess to maintain a light, blended effect once you apply it to the wall.
Apply the limewash effect
Start painting in the middle of the wall using broad, crisscross or swirling motions. Think of painting clouds - your movements should feel fluid and spontaneous. Blend the two colours as you go, maintaining a consistent orientation of your brush so that the light and dark areas stay defined. Keep the edges of each section wet to avoid hard lines forming. Work across the wall in small areas, and step back regularly to check how the finish is developing.
Finishing touches
If the wall needs a little more variation or texture after drying, you can go over it again using the same light layering technique. Don’t worry about perfection. The more organic your brushstrokes, the more authentic the finish will look. Let the limewash paint dry completely before removing any masking tape. Once dry, the result will be a beautiful, soft limewash-style texture with gentle colour movement that enhances your space.
Now that you've learnt how to get a limewash effect with paint
Here are more painting inspiration and tips.
More D.I.Y. Advice
Health & Safety
Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.
Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer.
Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.
Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer.