How to waterproof a shower

Jas Naylor
View the video

How to waterproof a shower

View the video
×

Project Overview

Applying a waterproof barrier is an essential part of preparing to install a shower. We’ll teach you how to apply the waterproofing and reinforce the joins and gaps in the walls and floor. You will also learn how to prepare and reinforce your surfaces properly. 

Continue to step-by-step instructions

Step by Step Instructions

1 Mark out the area to waterproof around the shower
2 Prepare to waterproof the shower
3 Waterproof the shower walls
4 Waterproof the shower floor
  • Step 1. Mark out the area to waterproof around the shower

    Measure up your wall and mark out where you will be waterproofing. Then mask those lines off with masking tape. A good rule of thumb is to extend your waterproofing 100mm above your water outlet and 100mm wider than the edges of your shower. But check your local council regulations to make sure what is required.
  • Step 2. Prepare to waterproof the shower

    Use a brush to paint primer onto the area you want to waterproof. Use a generous amount on every surface. While you are waiting for the primer to dry, measure the edges, corners and internal joints that need to be waterproofed. Now cut lengths of the reinforcing membrane to cover these areas.
  • Step 3. Waterproof the shower walls

    Paint a coat of waterproofing where your reinforcing membrane will be installed. Then put the membrane on the still wet area. Now apply another coat over the top, flattening the membrane with your brush as you go. To make it easier when putting membrane into recessed corners, cut a nick that lets it split across the different surfaces. Once the membrane is installed, use horizontal strokes to paint a first coat of waterproofing across the walls.
  • Step 4. Waterproof the shower floor

    Install reinforcing membrane where the floor joins the walls and around the drain. Once again, paint the area, then put the membrane down and give it a second coat to flatten it. When your membrane is installed, waterproof the rest of the floor. Once the first coat has dried, give the whole shower cavity a second coat, this time using vertical strokes instead of horizontal ones on the walls.
Contemporary ensuite after 01:00

Ideas & Makeovers D.I.Y. contemporary ensuite Create a contemporary ensuite by transforming a tired, old bathroom into a place where you’ll instantly feel relaxed.

Modern bathroom remodel 01:03

Ideas & Makeovers D.I.Y. modern bathroom remodel Learn just how easy is to transform and remodel a tired bathroom into a modern and stylish bathroom.

bathroom lighting

Planning & Projects How to light your bathroom Lighting a bathroom can be a challenge – they are especially prone to shadows and reflective surfaces. But the good news is there’s a vibrant range to choose from, including pendants, downlights, diffuse ceiling lights, sconces, under-cabinet lighti...

bath with timber bath caddy 04:10

Planning & Projects D.I.Y. timber bath caddy A nice warm bath is a great way to relax and unwind at the end of the day. This timber bath tray is the perfect addition to any bathroom, giving you a place to put everything you could need within arm’s reach.

how to make diy wooden towel ladder 02:50

Planning & Projects How to make a wooden towel ladder This stylish wooden towel ladder will add a touch of class to your home. It’s easy to make and is the perfect way to display rugs, scarves, throws or hang towels to dry. It’s ideal to move from room to room, wherever you need hanging space.

tile niche 04:50

Bathroom Tiles How to install a bathroom tile niche Learn how to install a tile niche and make your bathroom clutter free.

shower head

Baths Showers & Toilets How to select the right shower head There is a wide range of shower heads to choose from, this guide from Bunnings Warehouse will help you select the right shower head for your bathroom.

Top of the content