Cabot's 500ml Matt Water Based Exterior Clear

Cabot's Exterior Clear Water Based is a fast drying, easy to use, durable varnish designed to save you time with a 4 hour recoat. Providing protection without hiding the grain, the low odour, non-yellowing formula contains UV absorber technology, making it ideal for use on exterior doors, windows and trim. PREPARATION Fill nail holes, cracks and other defects with a suitable exterior timber putty after applying the first coat of this product for accurate colour matching. Bare Timber Lightly sand and remove all sanding dust. Coat with Cabot's Exterior Clear Water Based. Previously Varnished Timber Lightly sand and remove all sanding dust, then check for adhesion by applying one coat to a small test area and allow to dry for 4 hours. Press a piece of sticky tape firmly to the surface and pull off quickly. If the coating isn't removed with the tape, clean surface with Cabot's Deck Clean following label instructions and coat with Cabot's Exterior Clear Water Based. Previously Stained and Oiled Timber Clean surface with Cabot's Deck Clean following label instructions. Test if the surface is ready for coating by sprinkling water on the timber. If the water beads on the surface, repeat the application of Cabot's Deck Clean. If water is absorbed into timber, it is ready for coating. For a more transparent look, sand timber back to bare before coating. Weathered and Grey Timber Clean with Cabot's Deck Clean following label instructions, then apply Cabot's Exterior Clear Water Based. For best results, sand timber back to bare. APPLICATION 1. Stir thoroughly with a broad flat paddle before and during use. 2. Always brush in the direction of the grain. Apply 3 liberal coats, allowing 12 hours between coats. 3. For best results, lightly sand surface between coats ensuring all sanding dust is removed. 4. For additional protection in areas exposed directly to sunlight, further coats may be applied. MAINTENANCE Regularly check your coated timber for signs of weathering. When required, clean the surface with Cabot's Deck Clean following label instructions. Allow the surface to dry prior to re-applying Cabot's Exterior Clear Water Based following application instructions. HINTS Cabot's Exterior Clear Water Based is not suitable for: • Previously wax coated finishes • Outdoor furniture • Broad wall application such as cladding and weatherboards • Walk-on areas