Bunnings

Sign in or sign up

No Bunnings account? Sign up
PowerPass customer?
Visit the dedicated trade website

Project list

Sign in to your account

0
1/9
Cabot's
Cabot's

Cabot's 250ml Blackbean Oil Based Deck and Exterior Stain

I/N: 0239702

$18.50

How to purchase

Click & Collect

Select a store for availability

In-store

Select a store for availability

Delivery

Enter postcode or suburb for estimate

  • Rejuvenates and restores timber
  • Semi-transparent
  • Highly durable
  • Dirt and mould resistant
  • Available in 25 great colours
Cabot's Oil Based Deck and Exterior Stain is a durable stain which rejuvenates and transforms the colour of all exterior timber. It is available in 48 great colours.

PREPARATION
NOTE: Fill holes and imperfections with a suitable timber putty if required.

Bare Timber
1. To coat new bare timber immediately, scrub damp timber with Cabot’s New Timber Prep, following label instructions.
2. New Timber Prep will draw out tannins and oils quickly from the surface, allowing you to skip the 4-6 weeks weathering process required for new timber.
3. Always follow New Timber Prep with Cabot’s Deck Clean following label instructions.
4. Remove excess water from the surface with squeegee on Cabot’s Deck Prep brush and allow timber to dry for at least 1 hour.
5. NOTE: Cooler conditions could slow down the drying time of the timber.

Previously Stained and Oiled Timber
1. For exterior surfaces clean with Cabot’s Deck Clean following label instructions.
2. Test if the surface is ready for coating by sprinkling water on the timber. If the water beads on the surface, repeat the application of Deck Clean. If water is absorbed into timber, it is ready for coating.
3. For a more transparent look, sand timber back to bare then clean with Cabot's Deck Clean before coating.

Weathered and Grey Timber
1. For best results, sand timber back to fresh substrate. Clean with Cabot's Deck Clean following label instructions.

APPLICATION
Apply with Brush, Decking Applicator
1. Stir thoroughly with a broad flat paddle before and during use.
2. Apply liberally along the length of the board including exposed edges and end grain by brush or pad applicator. 3. Allow the first coat to dry and then apply a second coat using the same method.
4. Continue applying coats until you achieve the depth of colour you desire.

MAINTENANCE
Every 12 months check your coated timber for changes in colour or water repellency diminishes due to weathering. When required,
1. Clean the surfaces with Deck Clean as per label instructions.
2. Recoat with 1-2 coats of Deck & Exterior Stain OB. Use Cabot’s Everyday Deck Wash to refresh exterior timber decking and help remove dirt, dust and bird droppings for everyday use.