Bunnings

Sign in or sign up

No Bunnings account? Sign up

Project list

Sign in to your account

Cabot's

Cabot's 1L Maple Oil Based Interior Stain

No reviews yet

I/N: 1520439

Cabot's 1L Maple Oil Based Interior Stain
Cabot's

Cabot's 1L Maple Oil Based Interior Stain

No reviews yet

I/N: 1520439

$61

Afterpay logo

4 payments of $15.25

PayPal logo

4 payments of $15.25

Zip logo

From $10 a week


Select your preferred purchase method

StoreFind your item in store

We are unable to determine your nearest store

Features

  • Enhances timber grain
  • Easy to apply
  • Oil enriched
  • Clear top coat required
Cabot's Interior Stain Oil Based is a penetrating stain for interior doors, windows, trim and furniture. This oil-enriched formula rejuvenates and transforms interior timber, whilst enhancing the natural grain. Available in a variety of naturally beautiful wood stain colours.

PREPARATION

Note: Fill nail holes, cracks and other defects with Cabot’s WoodTone Putty after applying the first coat of this product for accurate colour matching. Remove stains, dirt, wax, grease and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.

Bare Timber
Sand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.

Previously Coated Timber
Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.

IMPORTANT
The natural colour of the timber will affect the finished colour of the stain. The clear coating used to seal the stain may also have some affect on the final colour. Always test the stain on an off cut or concealed part of the actual job before proceeding.

Staining a Floor
For the best method of staining a floor, please refer to Cabot's Stain & Varnish range.

APPLICATION

Apply with a brush, rag or roller

1. Stir thoroughly with a broad flat paddle until pigment is mixed in, and colour is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure colour uniformity.
2. Apply with a good quality brush, roller or lint free rag and work the stain evenly into the grain.
3. Allow to set for 2-10 minutes then rub with a clean soft cloth using a circular motion to remove any excess stain and produce an even coloured surface. The intensity of the colour will depend on porosity of timber and the length of time before the stain is wiped off.
4. Allow 8 hours drying time.
5. Apply Cabot's Cabothane Clear Oil Based or Cabot's Danish Oil as a top coat following label instructions.

MAINTENANCE

Regular inspection of all coated surfaces is recommended.

Once water repellency has diminished, re-apply the existing topcoat as per label instructions.

If the timber needs re-staining, sand back to bare.

Details

Dimensions

 

Width

Height

Length

Product

110mm130mm110mm

Package

110mm135mm110mm

Specifications

Colour
Maple
Model Name
Cabots Oil Based Interior Stain Maple 1L
Model Number
85982046-1L
Material
Oil Based
Volume
1
Application Method
Brush,Roller or Rag
Outdoor (Yes/No)
No
Splatter Resistant (Yes/No)
Yes
Indoor (Yes/No)
Yes
Low Temperature (Yes/No)
No
Time Before Recoating (mins)
480
Primer Required (Yes/No)
No
Recommended Surfaces
Timber
Minimum Temperature for Use (°C)
10
UV Resistant (Yes/No)
Yes
Cleanup
Mineral Turpentine
Coverage Area (m2)
12
Container Size (L)
1
Tintable (Yes/No)
Yes
Sheen
none

Returns

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.

Shop Online

Shop wherever you are, whenever you want.

  • Buy products online from our wide range
  • Click & Collect your purchase in-store or we'll deliver it to you
  • Visit our Shop Online page to learn more

Ratings & Reviews