AKARI 36W Ambient LED Lighting Hub

The AKARI Ambient Lighting Hub gives you the ability to create a bespoke lighting solution or extend a Lighting Kit. The Lighting Hub provides power to the AKARI Light Bars – Recessed, Surface, Silicone & Magnetic. Included is a signal interconnect cable; allowing you to control two Lighting Hubs as a part of a complex installation from the single AKARI Ambient Dimmable Touch Switch or Motion Sensor. Designed for DIY - Plug into a wall socket, no Electrician needed to create professional finish ambient lighting. Key features: - Powers up to 4 metres of AKARI Light Bars - Designed for DIY - Signal interconnect cable included: control two sets of Light Bars from one switch or remote. What’s Included: - AKARI Ambient Lighting Hub 36 Watt. - Signal Interconnect Cable for complex lighting installations. How to Connect: - Connect power supply cable to Lighting Hub Input port. - As required, connect Light Bars into Light Bar ports. - Connect chosen control (Dimmable Touch Switch or Motion Sensor) into pink Centralised Control port. - Plug Lighting Hub into 240V wall outlet & turn on. Project Inspiration: - Use to power large lighting installations of up to 4 metres in total length. This could be from a range of Light Bars in length or mounting type. - The AKARI Ambient Lighting Hub 4 Watt features 4 Light Bar Ports, facilitating a greater number of light bars able to be connected. - With the Signal Interconnect Cable, two AKARI Ambient Light Hubs can be connected so they both operate through the same Centralised Control. This means one Dimmable Touch Switch or Motion Sensor can control the Light Bars connected to both Light Hubs. Please see product manual for more information.