- Mows up to 3.5 acres on a single charge (with included 3 x 80V HP™ 10.0Ah Batteries and 3 x 36V 12.0Ah batteries connected)
- One-handed joystick control for speed and steering
- Dual blade systems with a combination of Cross Cut Blades and discharge blades
- LCD screen for monitoring runtime, drive and cut speed, and battery charge status
- Adjustable cutting height (25mm-100mm)
The RYOBI 80V HP™ 54” Lithium Zero Turn Ride-On Mower is designed for maintaining lawns on any extra-large open areas of flat grass. RYOBI’s HP motor and battery technology combines with five direct drive motors (three for mowing, two for driving) to generate a superior mowing performance.
This model can mow up to 3.5 acres of lawn on a single charge*. There’s no exhaust fumes or reliance on petrol, and no blade belts to constantly replace. The direct-drive motors also run quieter than petrol engines. The Intelligent Drive System Joystick gives you advanced control with zero-turn steering — from the palm of your hand!
Use the LCD screen and control panel to adjust cutting and drive speeds as well as monitoring battery status and runtime. Choose between 12 different cutting heights from 25mm-100mm (1”-4”) to achieve the perfect lawn length. The Steel Cross Cut Blades are designed to leave a sharp finish on lawns. Features like seat suspension, adjustable arm rests, beverage holders and USB-A ports have been added for enhanced comfort.
This Ride-On Mower only requires 80V HP 10.0Ah batteries (three included) for operation. To extend runtimes, you can also connect an additional 36V battery using the model’s four 36V battery slots (3 x 36V 12.0Ah batteries already included). The 36V batteries used on this model are the same ones used to power other RYOBI 36V garden tools.
The included ZTR Super Charger is designed to make battery charging quick and easy. It can charge all 80V and 36V batteries connected to the Ride-On Mower via one charging port in as little as five hours.**
This model’s 6-year (4+2 year with registration) repair warranty is backed by the RYOBI Experience Team (RXT) for onsite servicing.***
Please note: Some assembly is required.
*Based on the R80XZTR54 on high drive speed and low blade speed. Runtime can vary depending on battery configuration, deck size and environmental conditions.
**Calculation based on usage with 3 x 80V HP 10.0Ah Batteries and 4 x 36V 12.0Ah batteries connected.
***T&Cs apply.
