Skip to content
Locating nearby store...
Please enter at least 3 character
Suggested Suburbs
Suggested Stores
Previous Stores
Change Store
  • Made from tough UV stabilised polymer
  • Available in easy to carry 1 metre lengths
  • Channel lengths easily join together and other components by simply clicking together
  • Connect to stormwater pipe via end cap or bottom of channel

The EasyDRAIN Channel and Grate features DIY installation for effective surface water drainage suitable for around the home and light commercial areas including exterior patios, swimming pool areas, paved terraces, car parks, walkways, playgrounds, or any place that water collects. Pedestrian traffic use only, not recommended for driveway applications

1. Prepare Trench
Dig a trench that is 50mm deeper and wider than the channel being installed.
Place compacted bedding sand or concrete slurry in the base of the trench.
Use a string line to ensure straightness and the correct finish height.
Attach the grates to the channel prior to installation

2. Install Channel
Connect the end cap to ends of the channel and seal with silicone.
If required, cut the channel to the desired length
To connect to pvc pipe, cut and outlet in the base of the channel (or End Cap for standard Easydrain) as required.
Connect lengths of channel as necessary ensuring that the joints click together.
3. Finish Installation
Place a suitable expansion material aliong the top edge of the channel.
Pour concrete around each side of the channel ensuring that the base is completely immersed.
Lightly compact and finish the concrete slightly above the surface level of the grate(approximately 2-3mm0 to promote run off from teh surrounding area into the drain.

12 Months

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy

Returns policy