Skip to content
Locating nearby store...
Please enter at least 3 character
Suggested Suburbs
Suggested Stores
Previous Stores
Change Store

Initializing title...

  • Easy to install DIY product
  • 80mm depth enables easy installation and less digging
  • Convenient and easy to handle 1 metre lengths
  • Comes standard with a heel friendly galvanised plated steel grate
  • Connects to 75mm, 90mm and 100mm PVC pipe

Easy DIY surface water drainage system channel and grate suitable for around the home and light commercial areas including: exterior patios, playgrounds, paved terraces, walkways and any other place that water collects. Pedestrian traffic use only, not recommended for driveway applications. 80mm depth enables easy installation and less digging. Not suitable around pool areas or salt water environments.

1. Prepare Trench
Dig a trench that is 50mm deeper and wider than the channel being installed.
Place compacted bedding sand or concrete slurry in the base of the trench.
Use a string line to ensure straightness and the correct finish height.
Attach the grates to the channel prior to installation

2. Install Channel
Connect the end cap to ends of the channel and seal with silicone.
If required, cut the channel to the desired length
To connect to pvc pipe, cut and outlet in the base of the channel (or End Cap for standard Easydrain) as required.
Connect lengths of channel as necessary ensuring that the joints click together.
3. Finish Installation
Place a suitable expansion material aliong the top edge of the channel.
Pour concrete around each side of the channel ensuring that the base is completely immersed.
Lightly compact and finish the concrete slightly above the surface level of the grate(approximately 2-3mm0 to promote run off from teh surrounding area into the drain.

12 Months

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy

Returns policy