How to erect temporary fencing

DIYBradley13Ccropped
View the video

How to erect temporary fencing

View the video
×

Project Overview

Temporary fencing is an effective way to keep an area like a building site secure for a short period of time. Its design means it can be assembled on almost any surface and it is easy to take apart and store once your job is over. This video shows you everything you need to know to safely erect your fence. Continue to step-by-step instructions

Step by Step Instructions

1 Install a fence panel
2 Use brackets to connect the fence panels together
3 Install safety struts
  • Step 1. Install a fence panel

    Set one of the concrete blocks in position. Place one leg of a fence panel into one of the holes in the concrete block. Position the panel along the line you want the fence to travel. Then position a second concrete block for the other end of the panel.
  • Step 2. Use brackets to connect the fence panels together

    Connect the fence panels using a bracket up the top of the vertical struts. The bracket is locked into place using a nut and bolt. Tighten the nut firmly using a spanner or a torque wrench. To make everything as safe as possible, keep the nut and thread side facing inwards.
  • Step 3. Install safety struts

    Safety struts anchor your fence in place and keep it from toppling over. Once your fence is up, connect the struts to the back of each panel using brackets. Connect one bracket down near the bottom of the vertical strut, and the other somewhere near the middle. To increase the stability, weigh the safety strut down with concrete blocks.
water feature

Paths & Landscaping Five garden feature ideas Whether you’ve got an acre or a patio area, chances are when it comes to your garden, there’s always room for improvement. And you’d be surprised, it doesn’t take a lot to transform your outside space and make it a more attractive and enjoyable plac...

Landscape any size backyard

Paths & Landscaping Landscaping for any size backyard Here are some simple D.I.Y. landscaping ideas to make a great outdoor space.

Man using a plate compacter to spread and level the road base 05:00

Paths & Landscaping How to prepare and lay a base for pavers Find out how easy it is to prepare an area and level it ready to lay pavers. Just follow our step-by-step guide.

How to seal pavers 01:25

Paths & Landscaping How to seal pavers Applying sealer gives your pavers a protective coating that’s also easy to clean. We’ll show you how to do this in your backyard in just four easy steps.

Person laying the cut paver 05:11

Paths & Landscaping How to lay pavers A paved area is an attractive, versatile addition to any backyard. Easy to lay and cost effective, we’ll show you how to lay pavers in a stretcher bond pattern.

colourful garden

Paths & Landscaping Add colour to your garden After a cold grey winter, spring is the perfect time to brighten up your garden. While flowers are one solution, there are plenty of other easy and inexpensive ways to add a splash of colour to your outdoors.

Man on ladder cutting high tree branches 02:41

Paths & Landscaping How to remove a tree Learn how to safely cut down unwanted trees.

Man using a spirit level to level the pond 02:44

Paths & Landscaping How to build a garden pond A pond makes a great feature in any garden. Follow our step-by-step guide and we’ll show you how to install one.

Top of the content