How to build a pergola frame

Jason
View the video

Project Overview

We’ll show you how to put up a sturdy pergola, from digging the holes, to framing the structure and installing the rafters. We’ll show you how to do it safely, so it’s all squared off and built to last.

Continue to step-by-step instructions
This D.I.Y. Advice is part of a series How to build a pergola

Step by Step Instructions

1 Prepare your post holes
2 Cut and install the wailing plate
3 Make a profile cut for your rafters
4 Preparing the upright post
5 Attach external beams and rafters
  • Step 1. Prepare your post holes

    Dig the holes in the ground for your posts, following the approved plans. Then place the post stirrups into the middle of the hole. Now fill up the hole with concrete to the base of the post stirrup, about 50-60mm below the stirrup top. Repeat the process for all of the posts and wait for the concrete to dry.
  • Step 2. Cut and install the wailing plate

    Measure and cut the wailing plate to size, which will be connected to the fascia. Get someone else to help you fix the plate into position on your fascia with nails and screws. Use large bugle screws to screw through the fascia into the house rafters to give you maximum support.   
  • Step 3. Make a profile cut for your rafters

    Create a template of your gutter profile and use this to cut the ends for all of your rafters. This way the rafters will fit neatly against your gutters. Use a jigsaw to make the cut cleanly. Coat the raw timber where you have cut with a primer to protect the wood. Your rafters are now ready to be installed.   
  • Step 4. Preparing the upright post

    To make sure the post supports the rafter weight, measure and make a precise cut out of the size of the rafter within the post. Use your circular saw and hand saw to make the cuts, but don’t overcut them or you could weaken the post. Next measure the distance between the stirrup and the rafter and cut the post to length with your circular saw. Place the post in the stirrup, and use the spirit level to make sure it is straight. Then bolt the post into the stirrup. Temporarily brace the post while you measure, cut and bolt the other posts in. 
  • Step 5. Attach external beams and rafters

    Once you have put all the posts in, you’re ready to put up the external beam. Secure it to the framework with extra screws to hold the rafters in place. Add a length of wood, called a cleat, underneath your outside beams to hold the rafters in place. Attach the ends of the rafters to the beams using large bugle screws. You’ll also need to use a universal bracket on each side of the rafter and the wailing plate, with proprietary nails for added strength. Take the cleat off and your pergola is ready to paint and finish.
diy chalkboard cabinet hanging in the garage 01:27

Shelving & Storage D.I.Y. upcycled chalkboard cabinet We take an old cabinet and upcycle it into a handy chalkboard cabinet that will give you somewhere to store tools and a place to write lists or plans for your next project.

honeycomb wall shelves 02:23

Shelving & Storage How to make D.I.Y. honeycomb floating wall shelves These honeycomb floating wall shelves are a modern and stylish way to make a feature of any wall in your house. They’re easy to make and they’ll give a somewhere to show off your favourite things.

bathroom rejuvination 01:44

Ideas & Makeovers Learn how to give your bathroom a makeover on a budget Simple and affordable ways to give your tired bathroom a makeover.

roses in garden

Planting & Growing Winter garden ideas It may be cold outside in most parts of New Zealand but there are still a few things that need to be done in the garden at this time of the year. But if you can’t face going outside, you can always bring your garden inside suggests Bunnings horticul...

diy wood and concrete kitchen island 05:43

Outdoor Living D.I.Y. wood and concrete kitchen island You’d be surprised how easy it is to make this wooden and concrete kitchen island from just a few simple tools and materials.

Modern living room DIY makeover 01:29

Living Room How to give your living room a modern D.I.Y. makeover There are a few simple ways to freshen up a tired living room and make it a real feature in your home. You can create more space by knocking out a wall and updating the furnishings to fit. By adding floating cabinetry and open shelves, you’ll have m...

black diy wooden sofa arm table 02:49

Living Room D.I.Y. wooden sofa arm table A sofa arm table is a great addition if you’re short on space or don’t have a coffee table in your living area.

hampton kitchen

Ideas & Makeovers Hamptons sanctuary Bright, open and stylish are the hallmarks of the Hamptons Sanctuary. The island bench doubles as a workspace and breakfast bar, while the bamboo benchtops and window panel cupboards complete the look.

Top of the content