Project Overview

It’s important to look after your kitchen knives so they stay sharp and out of the way of little hands. Here’s a stylish and easy way to keep all of your kitchen knives in one place and easy to reach when you need them. We’ll show you how to make this magnetic knife holder in a few simple steps. 

Continue to step-by-step instructions

Step by Step Instructions

1 Mark up the magnet positions
2 Cut the holes for the magnets
3 Secure the magnets
4 Tape the magnets in
5 Sand the knife holder
6 Stain the knife holder
7 Attach the knife holder to the wall
8 Attach your knives
  • Step 1. Mark up the magnet positions

    You can make your knife holder any length you like, ours is 500mm. Divide the wood into sections – this is where your magnets will be glued. We divided ours into 14 equal sections from one end of the wood to the other. We spaced out our markings by 25mm and left a larger space at the end.

  • Step 2. Cut the holes for the magnets

    Clamp the wood to the workbench and put on your safety gear. Make sure you set the router to the right depth so you don’t rout through the bottom of the wood. Working 10mm in from the edge, rout into the timber in the top of the first 25mm section. Then rout into the bottom of the second 25mm section. Repeat this pattern until you’ve routed all 14 holes and they are all offset.

  • Step 3. Secure the magnets

    Place a drop of all-purpose silicon into each of the holes. Insert a magnet into each hole and press it in gently. 

  • Step 4. Tape the magnets in

    Place a piece of painters’ tape over each of the holes. This will stop the magnet from falling out. Leave the silicon to dry. 

  • Step 5. Sand the knife holder

    Use the 240 grit sandpaper to lightly sand the front and sides of the knife holder. Wipe away any dust. 

  • Step 6. Stain the knife holder

    Depending on the look you want, you can paint, stain or wax your knife holder. We’re using a natural wax to highlight the grain in the wood. After applying the wax leave it to dry and then polish it.

  • Step 7. Attach the knife holder to the wall

    Place the knife holder against the wall. Drill a hole at one end of the holder and into the wall. Push a wall anchor into the hole and drill into place. Then with the knife holder straight on your wall, drill a second hole at the other end of the holder. Secure that end using a wall anchor. 

  • Step 8. Attach your knives

    Your knife rack is now ready to fill up and use. The one we made can fit up to seven knives comfortably, but if you have more knives to store, you may want to build a holder longer than 500mm.

Tools and Materials

Tools

  • Clamp
  • Drill
  • Drill bits
  • Dust mask
  • Earmuffs
  • Hollow wall anchor setting tool
  • Measuring tape
  • Paint brush
  • Painters tape
  • Pencil
  • Plunge router
  • 25mm router bit
  • Putty knife
  • Safety glasses
  • Stud finder
  • Spirit level
  • Sanding block
  • Silicone gun

Materials

  • 70mm x 19mm x 500mm hardwood
  • 8mm or 13mm hollow wall anchors x 2
  • 18mm x 8mm magnets x 14
  • Rags
  • 240 grit sandpaper
  • Silicone
  • Stain or wax
hydrangea

Planting & Growing How to create an allergy-friendly garden If you suffer from hay fever or other allergies, then being out in the garden can, at times, be less than enjoyable. But there are some steps you can take to create an allergy-friendly garden so you can spend more time gardening and less time sneezi...

pallet coffee table

Outdoor Living Five D.I.Y. ideas to update your outdoors Autumn is a great time of the year to tick off a few D.I.Y. projects from your to-do list. Here are a few good ideas to get you started.

pot

Planters How to choose the right plant pot Pots are a great way to add colour, interest or texture to your outdoor space. Tuscan Path’s Elaine Foster shares her top tips on how to choose the perfect pot.

sunflower

Planting & Growing How to plant and care for sunflowers Sunflowers are a great way to add colour to your garden, and they’re easy to grow and care for. Bunnings Greenlife buyer Katie explains the basics of how to grow sunflowers and shares some tips on how to care for them.

orchid

Planting & Growing How to care for orchids Orchids are a low-maintenance flower that can be grown indoors or outside in a protected location. And, with a little care, they will provide you with lots of colour.

paint

Guides & Projects How to upcycle almost anything with paint Rather than throwing out old household items, you can restore them with paint. It’s a quick, easy and affordable way to give anything from furniture to fences a new lease on life. Learn how to paint and prepare different surfaces to get the finish y...

DIY balcony and courtyard garden

Planters D.I.Y. balcony and courtyard garden Even if your outdoor space is limited to a balcony or courtyard, it doesn’t mean you have to miss out on having a garden. The team at Tuscan Path, who have been supplying pots to the Australian marketplace for over 40 years, share some ideas on how ...

 kitchen benchtop materials

Benchtops & Cabinets A guide to kitchen benchtop materials The perfect benchtop will add style to any kitchen. It’ll also see the most action, so choosing the right benchtop for your kitchen – and budget – is an important decision explains Bunnings Kitchen Designer Ben Carey.

Top of the content