How to assemble wall cabinets

Donna
View the video
Pause video

How to assemble wall cabinets

View the video
×

Project Overview

Wall cabinets are a great way to add storage to your kitchen and make the most of the space. We’ll show you how easy it is to assemble a flat pack wall cabinet using a cordless drill and a Phillips head screwdriver bit.
Continue to Step-by-step instructions.

Step by Step Instructions

1 Attach the sides of the wall cabinet to the back panel
2 Attach the base and top panels to the wall cabinet
3 Install the shelf in the wall cabinet
  • Step 1. Attach the sides of the wall cabinet to the back panel

    Put the base panel together with one of the sides, so the pre-drilled holes line up. Then twist the screws in place by hand first. This will steady the screw and make it easier to drive in. Now fit the screwdriver head to your drill and drive the screws into place. Repeat the process on the second side panel.
  • Step 2. Attach the base and top panels to the wall cabinet

    Put the base panel in place and line it up with the pre-drilled holes. Once again, twist the screws into the holes by hand before driving them all the way in with your drill. Then turn the cabinet over and repeat this process to install the top panel.
  • Step 3. Install the shelf in the wall cabinet

    Push the four shelf support brackets into the pre-drilled holes inside the cabinet. Then slide the shelf into place so it sits on the brackets. You can set the shelf to any height you like. Once your shelves are in place, the cabinet is ready to install.

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions which came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings team member.

Top of the content