For this project you'll need to wear gloves. So before starting on your tiling, put them on.
We chose a tile that's just the right size for a coaster, but you could select a larger tile. You could even use a piece of timber.
A good tip is to use a product called glue and grout. It's handy because it means you don't need to grout the tiles separately so it's much easier to use. Remember, it will dry pretty quickly so you might want to do a section at a time.
Spread the glue and grout onto the tile. Then using your spatula evenly distribute it across the surface.
Let your imagination run wild! Think about your designs. Try a border with some different coloured tiles, make a flower, the sun, or even a heart for mum. We made a rainbow. Press each tile firmly into the grout. It's a good idea to leave a nice, white gap between each tile.
Do a section at a time. Add more glue and grout and continue putting your tiles in place.
Once you've laid all the tiles, be sure to push them gently into place so they don't move.
Set the tile aside and leave it to dry for 24 hours. Clean any excess glue and grout with warm, soapy water.
Display your coaster in the lounge. It's ready for use and you can admire your handiwork!