Project Overview

After installing a tile niche, it’s important to make sure the edges and the corners have a professional finish, rather than leaving an exposed tile edge, which can be easily damaged. A tile trim is easy to install and not only reduces how long it will take to lay your tiles, it also protects the edges of your niche and completes the look.

Continue to step-by-step instructions
man smoothing a metal edge
View the video
00:14
×

How to smooth metal edges

When you cut metal with a hacksaw or an angle grinder, you are sometimes left with burrs on the face of the cut. A quick way to clean these up is to rub the metal along a hard, rough surface like a brick or a concrete slab. A metal file will do a better job, but this works well.

Step by Step Instructions

1 Check the thickness of your tiles
2 Measure the length and height of the niche
3 Cut the tile trim
4 Install the trim
  • Step 1. Check the thickness of your tiles

    Once you’ve installed the tile niche, the next step is to install the tile trim around the edge. It’s important to select the tile trim according to the thickness of your tiles. When you go to buy your trim, it’s a good idea to take a piece of tile with you to get the right size.

  • Step 2. Measure the length and height of the niche

    Use your tape measure to measure the length and height of the tile niche. Take into account that you will be cutting the tile trim at 45-degree angles. Use the marker or pencil to mark these measurements on the tile trim.

  • Step 3. Cut the tile trim

    Cutting the tile trim is like cutting a picture frame, all of the joins have to be at 45-degree angles. Double check your measurements by placing the trim across the length and height of the niche to make sure they’re correct. Place the trim in the mitre box and cut them with a hacksaw. After cutting the trim, use a file to create a nice smooth edge. Repeat this process to cut the three other pieces of trim, making sure that the 45-degree angles at each end of the trim are opposing.

  • Step 4. Install the trim

    Put the bottom piece of the tile trim into place. Use the painters tape to secure it and make sure it’s level. Repeat this process for the trim on the sides and top. Don’t nail in the trim, it could compromise the waterproof membrane. Now you’ve installed the trim, you’re ready to start tiling the niche.

diy chalkboard cabinet hanging in the garage 01:27

Shelving & Storage D.I.Y. upcycled chalkboard cabinet We take an old cabinet and upcycle it into a handy chalkboard cabinet that will give you somewhere to store tools and a place to write lists or plans for your next project.

honeycomb wall shelves 02:23

Shelving & Storage How to make D.I.Y. honeycomb floating wall shelves These honeycomb floating wall shelves are a modern and stylish way to make a feature of any wall in your house. They’re easy to make and they’ll give a somewhere to show off your favourite things.

bathroom rejuvination 01:44

Ideas & Makeovers Learn how to give your bathroom a makeover on a budget Simple and affordable ways to give your tired bathroom a makeover.

roses in garden

Planting & Growing Winter garden ideas It may be cold outside in most parts of Australia but there are still a few things that need to be done in the garden at this time of the year. But if you can’t face going outside, you can always bring your garden inside suggests Bunnings horticultu...

diy wood and concrete kitchen island 05:43

Outdoor Living D.I.Y. wood and concrete kitchen island You’d be surprised how easy it is to make this wooden and concrete kitchen island from just a few simple tools and materials.

Modern living room DIY makeover 01:29

Living Room How to give your living room a modern D.I.Y. makeover There are a few simple ways to freshen up a tired living room and make it a real feature in your home. You can create more space by knocking out a wall and updating the furnishings to fit. By adding floating cabinetry and open shelves, you’ll have m...

black diy wooden sofa arm table 02:49

Living Room D.I.Y. wooden sofa arm table A sofa arm table is a great addition if you’re short on space or don’t have a coffee table in your living area.

hampton kitchen

Ideas & Makeovers Hamptons sanctuary Bright, open and stylish are the hallmarks of the Hamptons Sanctuary. The island bench doubles as a workspace and breakfast bar, while the bamboo benchtops and window panel cupboards complete the look.

Top of the content