How to install garden edging around a tree

carlo pamcone
View the video

How to install garden edging around a tree

View the video
×

Project Overview

Installing garden edging around a tree is a simple D.I.Y. project that will keep grass and its roots away from your tree and help it to grow. This easy to follow guide tells you what tools and equipment you need and how to secure the edging.

Continue to step-by-step instructions

Step by Step Instructions

1 Remove the concrete ring from around the tree
2 Dig around the tree
3 Roll-out and cut the garden edging
4 Secure the edging
5 Backfill and add mulch to the tree
  • Step 1. Remove the concrete ring from around the tree

    Remove the concrete tree ring from around the tree by putting the shovel under it and levering it up. Ask someone to help you lift the ring over the tree. If the tree is too tall to lift the concrete ring over, use a sledge hammer to break it into smaller pieces.

  • Step 2. Dig around the tree

    Use the shovel to create a border by digging up the grass surrounding the tree. How far you dig up the grass away from the tree will determine the length of edging you’ll need. Dig a trench for the plastic garden edging to sit in. 
  • Step 3. Roll-out and cut the garden edging

    Take the roll of garden edging and lay it in the trench you dug around the tree. Let the edging overlap where it meets by about 10 centimetres. This is where the edging will be joined. Mark where the end of the overlap is and use a hacksaw to cut the edging.
  • Step 4. Secure the edging

    Place a peg on the inside of the garden edging, where it overlaps. Use a hammer to drive the plastic peg into the ground. Make sure that the top of the peg’s overhanging lip is sitting on the garden edging. Continue hammering in the pegs, so that they’re evenly spaced around the garden edging and it is secure.

  • Step 5. Backfill and add mulch to the tree

    After hammering in the pegs, use the shovel to backfill the soil into the trench the garden edging is sitting in. Do this on the inside and outside of the edging. This will allow the grass to grow right up to, but not over the edging. Add a healthy layer of mulch around the tree, this will not only help the tree to grow but will also make the project look more professional.

water feature

Paths & Landscaping Five garden feature ideas Whether you’ve got an acre or a patio area, chances are when it comes to your garden, there’s always room for improvement. And you’d be surprised, it doesn’t take a lot to transform your outside space and make it a more attractive and enjoyable plac...

Landscape any size backyard

Paths & Landscaping Landscaping for any size backyard Here are some simple D.I.Y. landscaping ideas to make a great outdoor space.

Man using a plate compacter to spread and level the road base 05:00

Paths & Landscaping How to prepare and lay a base for pavers Find out how easy it is to prepare an area and level it ready to lay pavers. Just follow our step-by-step guide.

How to seal pavers 01:25

Paths & Landscaping How to seal pavers Applying sealer gives your pavers a protective coating that’s also easy to clean. We’ll show you how to do this in your backyard in just four easy steps.

Person laying the cut paver 05:11

Paths & Landscaping How to lay pavers A paved area is an attractive, versatile addition to any backyard. Easy to lay and cost effective, we’ll show you how to lay pavers in a stretcher bond pattern.

colourful garden

Paths & Landscaping Add colour to your garden After a cold grey winter, spring is the perfect time to brighten up your garden. While flowers are one solution, there are plenty of other easy and inexpensive ways to add a splash of colour to your outdoors.

Man on ladder cutting high tree branches 02:41

Paths & Landscaping How to remove a tree Learn how to safely cut down unwanted trees.

Man using a spirit level to level the pond 02:44

Paths & Landscaping How to build a garden pond A pond makes a great feature in any garden. Follow our step-by-step guide and we’ll show you how to install one.

Top of the content